An AC to DC power adapter that provides 5V and 2A should do the job: Make sure you select a power source that matches the strip’s needs. This means that for every 30 LEDs, the strip may draw as much as 1.5 A. At 5V, each LED draws about 50mA, when set to its full brightness. The LED strip should be powered using a 5V power source. It’s more handy if you want to connect the strip to an Arduino or to a breadboard. I’ve decided to cut the connectors, and solder header pins. These strips come with connectors at each end. You can adjust its size by cutting the strip with a scissors in the right place (the proper places to cut the strip are marked). As you can see, the strip is divided into segments, and each segment contains one RGB LED. This kind of strips are very flexible and can be cut to any length you want. In the following figure you can see the chip inside the LED.

This means that you can control lots of LEDs using just one digital pin of your Arduino. This allows a communication via a one-wire interface. These LEDs have an IC built right into the LED. This LED strip is made by WS2812B LEDs wired in series. You can control the brightness and the color of each LED individually, which allows you to produce amazing and complex effects in a simple way. In my opinion, this is the coolest type of LED strips. So, they can be left outside at the rain and dust without any problem. It is 5 meters long and the LEDs are enclosed in a weatherproof silicone. In the following figure you can see my WS2812B LED strip. You can visit Maker Advisor and find the WS2812B RGB LED Strip best price. Choose the one that best fits your purposes. The WS2812B addressable LED strip comes in several models that differ in size, sealant or LED density. The information in this post also works with other similar LED strips, such as strips of the WS28XX family, Neopixel strip and others. This post is about the WS2812B LED strip, which is an addressable RGB LED strip.

Free download led pinout